Products

Indium Antimonide (InSb) Single Crystal InSb Substrates

Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) offers  InSb crystal wafer up to 3" in diameter that are grown by a modified Czochralski method from highly purified, zone refined polycrystalline ingots.
1)2"InSb 
Orientation(100)
Type/Dopant:N/undoped
Diameter:50.8mm
Thickness:300±25µm;500um
Nc:<2E14a/cm3
Polish:SSP
2)2"InSb
Orientation(100)
Type/Dopant:N/Te
Diameter:50.8mm
Carrier Concentration: 0.8 – 2.1 x 1015 cm-3
Thickness:450+/- 25 um;525±25µm
EPD < 200 cm-2
Polish:SSP
3)2"InSb 
Orientation(111) + 0.5°
Thickness:450+/- 50 um
Type/Dopant:N/undoped
Carrier Concentration:  < 5 x 10^14 cm-3
EPD < 5 x 103 cm-2
Surface roughness: < 15 A
Bow/Warp: < 30 um
Polish:SSP
4)2"InSb 
Orientation(111) + 0.5°
Type/Dopant:P/Ge
Polish:SSP
5)2"InSb
Thickness:525±25µm,
Orientation[111A]±0.5°
Type/Dopant:N/Te
Ro=(0.020-0.028)Ohmcm, 
Nc=4-8E14cm-3/cc, 
u=(4.05E5-4.33E5)cm²/Vs, 
EPD<100/cm², 
Mobility:4E5cm2/Vs
One side edge;
In(A) Face: Chemically-mechanically final polished to 0.1µm (Final Polish), 
Sb(B) Face: Chemically-mechanically final polished to <5µm (Lasermark),
NOTE: Nc and Mobility are at 77ºK. 
Polish:SSP;DSP
6)2" GaSb
Thickness:525±25µm,
Orientation[111B]±0.5°,
Type/Dopant:P/undoped;N/undoped
Polish:SSP;DSP
Surface Condition and other Specification
Indium Antimonide (InSb) wafer can be offered as wafers with as-cut, etched or polished finishes with wide range of doping concentration and thickness. The wafer could be high quality epi-ready finishing.
Orientation Specification
Wafer surface orientations are supplied to an accuracy of +/- 0.5 degrees using a triple axis X-Ray diffractometer system. Substrates can also be supplied with very precise misorientations in any direction from the growth plane. The available orientaiton could be (100),(111), (110) or other orientation or mis degree.
Packaging condition
Polished wafer:individually sealed in two outer bags in inert atmosphere. Cassette shipments are available if required).
As-cut Wafer:Cassette shipment. (Glassine bag available on request).
Words Wiki
Indium antimonide (InSb) wafer is a crystalline compound made from the elements indium (In) and antimony (Sb). It is a narrow-gap semiconductormaterial from the III-V group used in infrared detectors, including thermal imaging cameras, FLIR systems, infrared homing missile guidancesystems, and in infrared astronomy. The indium antimonide detectors are sensitive between 1–5 µm wavelengths. Indium antimonide was a very common detector in the old, single-detector mechanically scanned thermal imaging systems. Another application is as a terahertz radiationsource as it is a strong photo-Dember emitter.
Relative products:
InAs wafer
InSb wafer
InP wafer
GaAs wafer
GaSb wafer
GaP wafer
If you are more interesting in InSb wafer,Please send emails to us:sales@powerwaywafer.com,and visit our website:www.powerwaywafer.com.

6 comments:

  1. I liked the way you wrote it. You did not divert from the topic even once which I have not seen in many other writers. Also the subject knowledge is appreciable. Edge Rounding Deburring Machines and Equipment.

    ReplyDelete
  2. I should thank you for writing on this topic, very useful information you have given through this blog. Buy Colored Optical Glass Filters.

    ReplyDelete
  3. Thank you for sharing an amazing article with us. As your regular reader, I always get something new on your blog. Keep it up!
    Grinding, Lapping and Polishing 450mm Wafers

    ReplyDelete
  4. It looks like you are very much interested to write posts on this topic. And you have gained ample of knowledge in this subject. Quite impressive blog site that you have. Ceramic Substrates and Technical Ceramics .

    ReplyDelete